Hook and Loop Tapes

Sky Industries Ltd.

ABOUT US GROUP ACTIVITIES OUR PRODUCTS FACTORY TOUR UPDATES CONTACT DETAILS CODE OF CONDUCT
 

Our Products

>> HOOK AND LOOP TAPE FASTENERS

PRODUCT VARIETY

Hook & Loop TapesOur wide range of quality products available in the hook and loop tape fasteners are as follows:

  1. Sew on hook and Loop tape fasteners.
  2. Pressure sensitive Hook and Loop tape fasteners (Self adhesive tape).
  3. Hook and Loop tape fasteners flame retardant variety.
  4. Pressure sensitive Hook and Loop tape fasteners (Flame retardant variety).
  5. Hook and Loop tape fasteners Multicolor variety.
  6. Embossed loop tape.
  7. Back to back Hook and Loop tape fasteners.
  8. Side by Side Hook And Loop Tape Fastener.

We are also continuously upgrading our products. Through the immense expertise we have in research and development, newer varieties and special products are being continuously developed.

SPECIFICATION* AND PACKING STANDARD
(* Under test conditions)

Sky Magic Logo


Technical Specifications of Sky Magic Sew On Hook and Loop Tape Fasteners

Criteria Description

Specifications of hook of 25 mm
Peel Strength

Initial 2.50 N/Cm

Shear Strength

Initial 10.00 N/Cm2
After 5000 openings 7.50 N/Cm2

 

Criteria Description

Specifications of Loop of 25 mm
Peel Strength

Initial 2.50 N/Cm

Shear Strength

Initial 9.80 N/Cm2
After 5000 openings 7.20 N/Cm2

SHRINKAGE

LESS THAN 2.00%

COLOUR FASTNESS

3 OR BETTER ON GREY SCALE

CURVATURE

PERMISSIBLE UPTO 3-5MM/MTR.

Optical Workmanship

As per sample

Packing

In rolls of 25 m in a cardboard box

Raw Material Type

Nylon

Colour Availability

Presently in 80 DIFFERENT SHADE
* dye to match facility available ( Azo free dyes used )

Width Availability

Variable, from 12mm to 120 mm

TERMS AND CONDITIONS

  1. All  specifications are at the sole discretion of Sky Industries Limited, Mumbai and to the conditions mentioned below.
  2. Specifications are subject to change without any notice.
  3. All tests are carries out under normal test/factory environment .
  4. SKY INDUSTRIES LIMITED reserves the right to alter the testing process and test conditions or to transgress the specifications intimated above or to circumvent any or all the test procedures for any or all of the production batch.
  5. Disclosure of any or all of the specifications are at the sole discretion of the SKY.
  6. Packing is done in rolls of 25 meters/yards of the hook and loop tape separately. These are then shrink packed and then placed in cartons. 

Sky S.A.T. Logo

Technical specifications of Sky Sat - Self Adhesive Hook and Loop Tape Fasteners

Criteria Description

Specificationstd>
Light Fastness

Grade 3 on Grey scale after 15 hrs. in UV light cabinet

Number Of Loops / Hooks

Loops :621.00 per sq. in. Hook : 273.00 per sq. inch

Optical Workmanship

As per sample

Packing

In rolls of 25 m in a cardboard box

Peel Strength

Initial : 0.22 Kg/cm
After 5000 openings : 0.17 Kg/cm

Quality Control

As per IS standard IS 8156-1994

Raw Material Type I

100% Nylon

Safety Environment

No Prohibitive substance used

Shear Strength

Initial : 1.00 Kg/cm2
After 5000 openings : 0.75 Kg/cm2 0°c to 80°c

Glue G.S.M.

More than 175 gsm

Colour Availability

More than 86 shades (Only Azo free dyes used, special colours available)

Dynamic Peel ( Polythene)

2.50 Kg/cm ( 180°) Peel

Width Availability

Variable, 12 mm to 100 mm

GENERAL PROPERTIES

  1. Best result on a wide range of substrate.
  2. Based on a special kind of rubber based resin for Hot Melt adhesive System
  3. Not recommended for vertical positions.
  4. Direct sunlight to be avoided.
  5. Not recommended on surfaces where migration of plasticiser is possible.
  6. Peel adhesion of Hot Melt Glue Coated (PSTC-1) = 3.80Kg/inch.
  7. Loop Tack (TLMI) = 4.00Kg/inch.
  8. SAFT (astm.d4498-85) = 90.00°c.
  9. Guaranteed width and length.

 

 

SPECIAL FACILITY AVAILABLE

The following are the special facilities available subject to conditions for sky magicComputerised colour matching facility

  1. Computerised colour matching facility.
  2. Available in special widths as per requirement.
  3. Can be provided in cut piece form.
  4. Special / customised packing available.


Advantages of factory piece cutting

  1. Zero errors in the cut zone to give a smooth finish on the cut edge.
  2. Tremendous saving of man hours thus freeing manpower for more productive use.
  3. Precise cutting of the cut pieces eliminating uneven cuts.
  4. Faster supply of cut pieces reducing cut piece stock holding.
  5. Accurate length of the piece cuts for standard size of the pieces.
  6. Electronically counting of pieces , so guaranteed number of pieces.

Advantages of using factory dyed material Velcro tapes

  1. The strength of the material remains intact.
  2. Azo free dyes used.
  3. Assured colour fastness.
  4. Scientific process used for dyeing.

 

PACKING STANDARDS WIDTH WISE

Widths in mm Meters / yards in 1 carton (single side) Widths in mm Meters / yards in 1 carton (single side)
12mm 2,000 38mm 650
16mm 1,400 50mm 500
20mm 1,200 60mm 450
22mm 1,200 75mm 350
25mm 1,000 100mm 250
27mm 1,000 110mm 250
32mm 800 120mm 200

Standard carton dimension : 20.5 inch x 10.25 inch x 23.25 inch
Cartons in a 20 ft container : 380 cartons 

Hook and loop tapes are also widely known as Hook and loop tape fastners, Velcro tapes, touch fastners, magic tapes, love tapes. The value added items normally offered from hook and loop tapes are:

a) Hook and loop Dots
b) Hook and Loop cut shapes
c) Hook and Loop cable ties
d) Back to back hook and loop tapes

TOP